INFO SHEET – COMMODORE VB TO VP 300MM

Our hub fits standard Commodore stub with standard bearings and seals.

Twin piston calipers off VT/VX/VY go right on however check fit of flat area of caliper against stub and rind extend flat if needed for flat fit.

4 piston calipers available on request, however these are in the works and will require more clearance than regular caliper.

Rotors are standard VT/VX/VY DBA040

Hoses are special, made in house to fit car.

Hoses changed from inverted flare to drill point at VP2

Fit 1-inch master if not already fitted.

Min 15-inch wheels needed.

Can do in Ford pattern.