INFORMATION SHEET- VALIANTS 300MM
< 1 min read
Table of Contents
Fitting story available on web site #
Rotors BA DBA504
Calipers AU2 note we do a small clearance grind between brackets bolts and client has to sometimes grind small flats on stub axle ears . Also, 4 Piston calipers available.
Bearings std A/B bearings and Holden type seals are ok.
Hubs are in Ford / VH to CM pattern 4.5 PCD by ½ inch Ford or 7/16 Valiant threads if specially ordered. No offset change.
Min 15-inch wheels required.
Standard master cylinder and booster ok
Up to VH series used smaller wheel bearings or drum type stub, fit VH to CM stubs on early Valliant’s
Powered by BetterDocs